R2511-HP MSR Router Series Voice Command Reference(V5)

244
Related commands
• address
• assign
hot-swap enable
Use hot-swap enable to enable the real-time switching function in a SIP server group.
Use undo hot-swap enable to disable the real-time switching function in a SIP server group.
Syntax
hot-swap enable
undo hot-swap enable
Default
The real-time switching function in a SIP server group is disabled.
Views
Server group view
Default command level
2: System level
Examples
# Enable the real-time switching function in SIP server group 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] server-group 1
[Sysname-voice-group-1] hot-swap enable
keepalive
Use keepalive to enable the keep-alive function and set the keep-alive mode for a SIP server group.
Use undo keepalive to disable the keep-alive function for a SIP server group.
Syntax
keepalive { options [ interval seconds ] | register }
undo keepalive
Default
The keep-alive function for a SIP server group is disabled.
Views
Server group view
Default command level
2: System level
Parameters
options: Specifies the OPTIONS keep-alive mode.