Manualshelf

R2511-HP MSR Router Series Voice Command Reference(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
21222324252627282930
16
Field Descri
p
tion
CallerAddr Caller number of the call.
CallerAddrSubst Caller number after substitution.
CallInfoTabIndex Call information index of the call.
Call Leg Number Number of call legs of the call.
Active Service Number of services involved in the call.
Spl Protocol Type of protocol used in the call leg.
LocalRef Local call identifier of the call leg.
IfIndex Voice interface index connected to the call leg.
IpAddress IP address connected to the call leg.
IpPort Port number connected to the call leg.
LegState State of the call leg.
ConnectState State of connection of the call.
SETUP message Statistics of SETUP messages sent to or from the LGS module.
SETUP_ACK message Statistics of SETUP_ACK messages sent to or from the LGS module.
ALERTING message Statistics of ALERTING messages sent to or from the LGS module.
CONNECT message Statistics of CONNECT messages sent to or from the LGS module.
RELEASE message Statistics of RELEASE messages sent to or from the LGS module.
RELEASE_COMP message Statistics of RELEASE_COMP messages sent to or from the LGS module.
INFORMATION message Statistics of INFORMATION messages sent to or from the LGS module.
SWITCH_CODEC message Statistics of SWITCH_CODEC messages sent to or from the LGS module.
FAXVOC_SWTH message Statistics of FAXVOC_SWTH messages sent to or from the LGS module.
FAXVOC_SWTHACK message Statistics of FAXVOC_SWTHACK messages sent to or from the LGS module.
display voice default all
Use display voice default all to view the current default values and the system-fixed default values for
voice and fax. For example, the carrier transmission energy level of GW defaults to 10 (the system-fixed
default value is 15).
Syntax
display voice default all [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.