R2511-HP MSR Router Series Voice Command Reference(V5)

257
H.323 configuration commands
address
Use address to configure the H.323 routing between a VoIP voice entity and a called party.
Use undo address to remove the H.323 routing that has been configured.
Syntax
address { ip ip-address | ras }
undo address { ip | ras }
Default
No routing policy is configured between the VoIP voice entity and the called party.
Views
VoIP voice entity view
Default command level
2: System level
Parameters
ip ip-address: IP address of the called party.
ras: The router uses registration, administration and status (RAS) messages to interact with the
gatekeeper server so as to realize the mapping between the phone number and the IP address. The RAS
messages are used only in the networking deployment that uses a gatekeeper to provide IP voice
services.
Examples
# Configure the H.323 direct routing between the voice entity 10 and the called party with the number
of 12345: set the IP address of the peer end to 10.1.1.2.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] match-template 12345
[Sysname-voice-dial-entity10] address ip 10.1.1.2
area-id
Use area-id to assign an area ID to the H.323 gateway.
Use undo area-id to remove the specified or all area IDs.
Syntax
area-id string
undo area-id [string ]