R2511-HP MSR Router Series Voice Command Reference(V5)

260
Usage guidelines
Use the quit command to exit gatekeeper client view.
Examples
# Enter gatekeeper client view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk]
Related commands
• area-id
• gk-2nd-id
• gk-id
• gw-address
• gw-id
• ras-on
gk-2nd-id
Use gk-2nd-id to configure the secondary gatekeeper for the gateway.
Use undo gk-2nd-id to remove the secondary gatekeeper.
Syntax
gk-2nd-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-2nd-id
Default
No secondary gatekeeper is specified for the gateway.
Views
Gatekeeper client view
Default command level
2: System level
Parameters
gk-name: Gatekeeper name, a case-sensitive string of 1 to 128 characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer 1 to 65535. The default is 1719.
Usage guidelines
For the reliability’s sake, a backup gatekeeper is configured. In case the communication with the primary
gatekeeper is abnormal (for example, timeout occurs) or the primary gatekeeper becomes unavailable,
gateways can turn to the backup gatekeeper for registration.
Before you can configure a backup gatekeeper, you must configure a primary gatekeeper with the gk-id
command.