R2511-HP MSR Router Series Voice Command Reference(V5)

261
Examples
# Configure a secondary gatekeeper, setting its IP address to 1.1.1.2, name to gk-backup, and RAS port
to the default.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2
Related commands
gk-id
gk-id
Use gk-id to configure the primary gatekeeper for the gateway.
Use undo gk-id to remove the primary gatekeeper.
Syntax
gk-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-id
Default
No primary gatekeeper is specified for the gateway.
Views
Gatekeeper client view
Default command level
2: System level
Parameters
gk-name: Gatekeeper name, a case-sensitive string of 1 to 128 characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer 1 to 65535. The default is 1719.
Usage guidelines
The gateway can locate the primary gatekeeper for registration only after you configure the information
of the primary gatekeeper.
Related commands
• area-id
• gw-id
• gk-2nd-id
• gw-address
• ras-on
Examples
# Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center, and RAS port to the
default.