R2511-HP MSR Router Series Voice Command Reference(V5)

262
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
gk-security call enable
Use gk-security call enable to enable security calling on the voice gateway.
Use undo gk-security call enable to disable security calling on the voice gateway.
Syntax
gk-security call enable
undo gk-security call enable
Default
Security calling is enabled.
Views
Gatekeeper client view
Default command level
2: System level
Usage guidelines
Security calling must be disabled on the voice gateway if the terminating gatekeeper cannot handle call
tokens.
Examples
# Disable security calling on the voice gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] undo gk-security call enable
gk-security register-pwd
Use gk-security register-pwd to configure a password for registration with the gatekeeper.
Use undo gk-security register-pwd to remove the registration password.
Syntax
gk-security register-pwd { cipher | simple } password
undo gk-security register-pwd
Default
No registration password is configured on the voice gateway.
Views
Gatekeeper client view
Default command level
2: System level