R2511-HP MSR Router Series Voice Command Reference(V5)

269
Related commands
• call-forwarding no-reply enable
• call-forwarding unavailable enable
• call-forwarding unconditional enable
• call-forwarding priority
call-forwarding priority
NOTE:
This command applies only to the FXS voice subscriber line.
Use call-forwarding priority to configure a priority level for call forwarding.
Use undo call-forwarding priority to restore the default.
Syntax
call-forwarding priority level
undo call-forwarding priority
Default
The call forwarding priority level is 2.
Views
Voice subscriber line view
Default command level
2: System level
Parameters
level: Call forwarding priority level in the range of 1 to 3. The smaller the value, the higher the priority.
Usage guidelines
The priority levels for hunt group, call forwarding, and call waiting are 1, 2, and 3 respectively. The
smaller the value, the higher the priority level. When you change the priority level of a feature, make sure
that different features have different priority levels.
Examples
# Configure the call forwarding priority level of 1 for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] call-forwarding priority 1
Related commands
• call-forwarding on-busy enable
• call-forwarding no-reply enable
• call-forwarding unavailable enable
• call-forwarding unconditional enable