R2511-HP MSR Router Series Voice Command Reference(V5)

272
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] call-hold enable
call-hold-format
Use call-hold-format to configure a tone playing mode for call hold.
Use undo call-hold-format to restore the default.
Syntax
call-hold-format { inactive | sendonly [ media-play media-id | moh-number string ] }
undo call-hold-format
Default
The tone playing mode is inactive, or silent mode.
Views
Voice view
Default command level
2: System level
Parameters
inactive: Specifies the silent mode for call hold.
sendonly: Specifies the playing mode for call hold.
media-play media-id: Specifies the ID of the media resource to be displayed, in the range 0 to
2147483647. If you do not specify this keyword, no tones are played for the called party during call hold.
moh-number string: Specifies a music on hold number in the E.164 format, a string of 1 to 31 digits (0
through 9).
Examples
# Configure the tone playing mode for call hold as sendonly, and specify the media resource with the ID
of 1919 as the played tones.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] media-file g729r8
[Sysname-voice-ivr-g729r8] set-media 1919 cf:/g729/music.wav
[Sysname-voice-ivr-g729r8] quit
[Sysname-voice-ivr] quit
[Sysname-voice] call-hold-format sendonly media-play 1919
call-transfer enable
NOTE:
This command applies only to the FXS voice subscriber line.
Use call-transfer enable to enable call transfer.
Use undo call-transfer enable to disable call transfer.