R2511-HP MSR Router Series Voice Command Reference(V5)

273
Syntax
call-transfer enable
undo call- transfer enable
Default
Call transfer is disabled.
Views
Voice subscriber line view
Default command level
2: System level
Usage guidelines
Call hold must be enabled before call transfer.
Examples
# Enable call transfer for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] call-transfer enable
Related commands
call-transfer start-delay
call-transfer start-delay
NOTE:
This command applies only to the FXS voice subscriber line.
Use call-transfer start-delay to configure a call transfer start delay.
Use undo call-transfer start-delay to restore the default call transfer start delay.
Syntax
call-transfer start-delay number
undo call-transfer start-delay
Default
The call transfer start delay is 3 seconds.
Views
Voice subscriber line view
Default command level
2: System level
Parameters
number: Call transfer start delay in the range of 2 to 5 seconds.
Usage guidelines
Call hold must be enabled before call transfer.