R2511-HP MSR Router Series Voice Command Reference(V5)

274
Examples
# Set the call transfer start delay to 2 seconds for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] call-transfer start-delay 2
Related commands
call-transfer enable
call-waiting
Use call-waiting to configure parameters for a call waiting tone.
Use undo call-waiting to restore the default.
Syntax
call-waiting { cwi-count number | cwi-duration length | cwi-interval length }
undo call-waiting { cwi-count | cwi-duration | cwi-interval }
Default
Two call waiting tones are played once. If the value of cwi-count number is greater than 1, the interval
for playing a call waiting tone is 15 seconds.
Views
Voice subscriber line view
Default command level
2: System level
Parameters
cwi-count number: Number of a call waiting tone play times, in the range of 1 to 5.
cwi-duration length: Number of tones played at a time, in the range of 1 to 3.
cwi-interval length: Interval for playing a call waiting tone the range of 10 to 30 seconds.
Examples
# Specify a call waiting tone to be played twice for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] call-waiting cwi-count 2
Related commands
• call-waiting enable
• call-waiting priority
call-waiting enable
Use call-waiting enable to enable call waiting.
Use undo call-waiting enable to disable call waiting.