R2511-HP MSR Router Series Voice Command Reference(V5)

283
Views
Voice subscriber line view
Default command level
2: System level
Parameters
level: Hunt group priority level in the range of 1 to 3. The smaller the value, the higher the priority.
Usage guidelines
The priority levels for hunt group, call forwarding, and call waiting are 1, 2, and 3 respectively. The
smaller the value, the higher the priority level. When you change the priority level of a feature, make sure
different features have different priority levels.
Examples
# Configure the hunt group priority level of 2 for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] hunt-group priority 2
Related commands
hunt-group enable
joined-conference enable
Use joined-conference enable to enable the three-party conference service in active participation mode
for a voice subscriber line.
Use undo joined-conference enable to restore the default.
Syntax
joined-conference enable
undo joined-conference enable
Default
The three-party conference in active participation mode is disabled.
Views
Voice subscriber line view
Default command level
2: System level
Usage guidelines
Enabling the three-party conference service in active participation mode will invalidate the local call
identification function (if configured).
Examples
# Enable the three-party conference service in active participation mode for voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] joined-conference enable