R2511-HP MSR Router Series Voice Command Reference(V5)

286
loose: Loose match, which indicates that strict consistency check is not needed, so the call ID that the
NOTIFY is sent to can be different from the call ID that proposed the subscription.
strict: Strict match, which indicates that strict consistency check is needed, so the call ID that the NOTIFY
is sent to must be the same as the call ID that proposed the subscription.
tcp: Specifies TCP as the transport layer protocol to be used during subscription. tls: Specifies TLS as the
transport layer protocol to be used during subscription.
scheme: Specifies the URL scheme to be used during subscription.
sip: Specifies SIP as the URL scheme to be used during subscription.
sips: Specifies SIPS as the URL scheme to be used during subscription.
Usage guidelines
Before specifying the transport layer protocol with the mwi-server command, configure the same
transport layer protocol with the listen transport command. Otherwise, no subscription request can be
initiated.
Before specifying TLS as the transport layer protocol with the mwi-server command, reference an SSL
client policy with the crypto command. Otherwise, no subscription request can be initiated.
Examples
# Configure the IP address of the voice mailbox server as 100.1.1.101, port number as 5060, subscription
effective time as 7200 seconds, subscription retry interval as 180 seconds, and the binding mode as
bind.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] mwi-server ipv4 100.1.1.101 port 5060 expires 7200 retry 180 bind
# Configure the domain name of the MWI server as cc.HP.com, port number as 5060, subscription
effective time as 3600 seconds, subscription retry interval as 240 seconds, and the binding mode as
bind.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] mwi-server dns cc.HP.com port 5060 expires 3600 retry 240 bind
# Configure the IP address of the voice mailbox server as 192.168.0.88, transport layer protocol as TCP,
and the binding mode as bind.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] mwi-server ipv4 192.168.0.88 tcp bind
timer called-hookon-delay
Use timer called-hookon-delay to enable calling party control and set the on-hook delay time of the
called party.
Use undo timer called-hookon-delay to restore the default.
Syntax
timer called-hookon-delay seconds