R2511-HP MSR Router Series Voice Command Reference(V5)

296
Table 58 Command output
Field Descri
p
tion
FAX_VOFR_STANDARD_SWITCH Fax statistics for standard VoFR.
FAX_VOFR_FRF11_TRUNK Fax statistics for FRF.11 trunk VoFR.
FAX_VOFR_FRF11_SWITCH Fax statistics for FRF.11 switched VoFR.
FAX_VOFR_MOTOROLA Fax statistics for Motorola compatible VoFR.
FAX_VOIP_STDT38 Fax statistics for standard T.38 VoIP.
FAX_VOIP_T38 Fax statistics for T.38 VoIP.
WAIT_DP_BEG_DEMODULATE_TIMEOUT
Statistics of the number of connections released in the
case that the DP does not start demodulation within the
specified time.
WAIT_DP_BEG_MODULATE_TIMEOUT
Statistics of the number of connections released in the
case that the DP does not start modulation within the
specified time.
WAIT_DP_END_DEMODULATE_TIMEOUT
Statistics of the number of connections released in the
case that the DP does stop demodulation within the
specified time.
WAIT_DP_END_MODULATE_TIMEOUT
Statistics of the number of connections released in the
case that the DP does not stop modulation within the
specified time.
WAIT_FRAMEACK_TIMEOUT
Statistics of the number of connections released in the
case that no Frame ACK message is received from the DP
within the specified time.
WAIT_T30MSG_PSTN_TIMEOUT
Statistics of the number of connections released in the
case that no T.30 message is received from PSTN within
the specified time.
WAIT_T30MSG_IP_TIMEOUT
Statistics of the number of connections released in the
case that no T.30 message is received from the IP network
within the specified time.
SPOOL_TIME_OVER
Statistics of the number of connections released in the
case that the number of spooling attempts exceeds the
maximum.
GET_INVALID_T30MESSAGE
Statistics of the number of connections released owing to
invalid T.30 message.
IPP_CALL_RELEASE Statistics of the number of released IPP calls.
NORMAL_RELEASE Statistics of the number of connections released normally.
UNKNOWN_REASON
Statistics of the number of connections released for
unknown reasons.
fax baudrate
Use fax baudrate to configure the maximum fax baud rate.
Use undo fax baudrate to restore the default maximum fax baud rate.