R2511-HP MSR Router Series Voice Command Reference(V5)

299
fax level
Use fax level to configure the transmit energy level of a gateway carrier.
Use undo fax level to restore the default.
Syntax
fax level level
undo fax level
Default
The transmit energy level of a gateway carrier is –15 d B m .
Views
POTS entity view, VoIP entity view, VoFR entity view
Default command level
2: System level
Parameters
level: Level of the energy transmitted by a gateway carrier, namely the transmit energy level attenuation
value in the range of –60 to –3 dBm. The greater the level value, the higher the energy. The smaller the
level value, the greater the attenuation.
Usage guidelines
Usually, the default transmit energy level of a gateway carrier is acceptable. If a fax still cannot be sent
when other configurations are correct, adjust the transmit energy level.
Examples
# Configure the transmit energy level of the gateway carrier to –20 dBm.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 4 pots
[Sysname-voice-dial-entity4] fax level -20
fax local-train threshold
Use fax local-train threshold to configure the fax local training threshold.
Use undo fax local-train threshold to restore the default.
Syntax
fax local-train threshold threshold
undo fax local-train threshold
Default
The fax local training threshold is 10.
Views
POTS entity view, VoIP entity view, VoFR entity view