R2511-HP MSR Router Series Voice Command Reference(V5)

303
modem compatible-param
Use modem compatible-param to configure the value of NTE payload type for the NTE-compatible
switching mode.
Use undo modem compatible-param to restore the default.
Syntax
modem compatible-param payload-type
undo modem compatible-param
Default
The value of the NTE payload type is 100.
Views
POTS entity view, VoIP entity view
Default command level
2: System level
Parameters
payload-type: Value of the NTE payload type for the NTE-compatible switching mode, in the range of 98
to 120.
Usage guidelines
This command is valid only for the NTE-compatible switching mode.
Examples
# Set the NET payload type to 99 for the NTE-compatible switching mode.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] modem compatible-param 99
Related commands
modem protocol pcm
modem protocol
Use modem protocol pcm to configure the codec type and switching mode for SIP Modem pass-through.
Use undo modem protocol to restore the default.
Syntax
modem protocol pcm { standard | nte-compatible } { g711alaw | g711ulaw }
undo modem protocol
Default
SIP Modem pass-through is disabled.
Views
POTS entity view, VoIP entity view