R2511-HP MSR Router Series Voice Command Reference(V5)

306
IVR configuration commands
call-normal
Use call-normal to configure the normal secondary-call number match mode for the node.
Use undo call-normal to remove the configuration.
Syntax
call-normal { length number-length | matching | terminator character }
undo call-normal
Default
The match mode of normal secondary-call numbers is not configured.
Views
Call node view
Default command level
2: System level
Parameters
length number-length: Matches the length of the numbers. The value range for number-length is 1 to 31.
matching: Matches the number. As soon as the matching number is found, the node executes the
secondary-call immediately.
terminator character: Matches the terminator of the numbers. The value can be any of 0 through 9,
pound sign (#), or asterisk (*).
Examples
# Configure node 1 to receive a normal secondary-call number by matching the pound sign (#) as the
dial terminator.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 call
[Sysname-voice-ivr-node1] call-normal terminator #
# Configure node 1 to receive a normal secondary-call number by matching the length of the number.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 call
[Sysname-voice-ivr-node1] call-normal length 7
# Configure node 1 to receive a normal secondary-call number by matching the number.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system