R2511-HP MSR Router Series Voice Command Reference(V5)

308
Parameters
string: Specifies the prefix code, a character string consisting of 1 to 31 characters that can include 0
through 9, pound sign (#), and asterisk (*). Table 59
describes these characters:
Table 59 Description of characters in the
string argument
Character Meanin
g
0-9 Digits 0 through 9.
Pound sign (#) or
asterisk (*)
Indicates a valid digit each.
Usage guidelines
When the number with a prefix exceeds 31 digits, only the first 31 digits are sent.
Examples
# Specify *21# as the prefix for all dialed numbers on the Call node.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 call
[Sysname-voice-dial-node1] dial-prefix *21#
display voice ivr call-info
Use display voice ivr call-info to display IVR call information.
Syntax
display voice ivr call-info [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IVR call information.
<Sysname> display voice ivr call-info
Index Called-Number Caller-Number Entity Node-Id Status
-------------------------------------------------------------------------
1 101 100 101 1 PLAY MEDIA