R2511-HP MSR Router Series Voice Command Reference(V5)

312
Examples
#Create IVR voice entity 100 and enter voice entity view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 100 ivr
extension
Use extension to configure an extension secondary-call for a node. You can configure at most ten
extension secondary-call numbers for a Call node.
Use undo extension to remove the configuration.
Syntax
extension extension-number call corresponding-number
undo extension extension-number
Default
No extension secondary-call number is configured.
Views
Call node view
Default command level
2: System level
Parameters
extension-number: Number to be entered by the subscriber, a string of 1-31 characters, including 0
through 9, pound sign (#), or asterisk (*).
corresponding-number: Extension number, a string of 1-31 characters, including 0 through 9, pound sign
(#), or asterisk (*).
Examples
# Configure an extension secondary-call for node 1: when the subscriber dials the number 0, node 1
executes the secondary-call to the number 5000.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 call
[Sysname-voice-ivr-node1] extension 0 call 5000
input-error
Use input-error to configure the processing method for handling subscriber input errors for a node.
Use undo input-error to remove the configuration.
Syntax
input-error { end-call | goto-pre-node | goto-node node-id } [ media-play media-id [ play-times ] |
repeat repeat-times ] *