R2511-HP MSR Router Series Voice Command Reference(V5)

316
[Sysname-voice-ivr]
ivr-timeout
Use ivr-timeout to configure the IVR global input-timeout processing method.
Use undo ivr-timeout to restore the default.
Syntax
ivr-timeout { expires seconds | media-play media-id [ play-times ] | repeat repeat-times } *
undo ivr-timeout
Default
The timeout time is 10 seconds, and the maximum timeout times are 3. The system does not play voice
prompts for input timeouts and terminates the call after the maximum number of times is reached.
Views
IVR management view
Default command level
2: System level
Parameters
expires seconds: Specifies the timeout time in seconds. The value range for seconds is 1 to 255, and the
default is 10.
media-play media-id: Specifies the ID of the media resource file to be played after an input timeout
occurs and before the node is executed again. The value range for media-id is 0 to 2147483647.
play-times: Specifies the times for playing voice prompts. The value range is 1 to 255, and the default is
1.
repeat repeat-times: Specifies the maximum number of input timeouts. After an input timeout occurs, the
node is executed again. When the maximum number of input timeouts is reached, the system terminates
the call. The value range for repeat-times is 0 to 255, and the default is 3.
Examples
# Configure the global input timeout processing method:
• The timeout time is 20 seconds.
• The media resource ID is 100001.
• The node plays voice prompts only once.
• The maximum number of timeout is twice
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] ivr-timeout expires 20 media-play 100001 1 repeat 2
media-file
Use media-file to enter voice media resource management view.
Syntax
media-file { g711alaw | g711ulaw | g723r53 | g729r8 }