R2511-HP MSR Router Series Voice Command Reference(V5)

319
Use undo operation to remove the configuration.
Syntax
operation number { call-immediate call-number | end-call | goto-node node-id | goto-pre-node |
media-play media-id [ play-times ] }
undo operation number
Default
No function is configured for a Service node.
Views
Service node view
Default command level
2: System level
Parameters
number: Specifies the serial number of the configured function, in the range 1 to 3.
call-immediate call-number: Indicates immediate secondary-call. The call-number argument represents
the phone number of the secondary-call.
end-call: Terminates a call.
goto-node node-id: Jumps to a specified node. The node-id argument represents the node ID, in the
range 1 to 256.
goto-pre-node: Returns to the previous node.
media-play media-id: Specifies the media resource file ID, in the range 0 to 2147483647.
play-times: Specifies the times for playing voice prompts. The value range is 1 to 255, and the default is
1.
Usage guidelines
If an executed function is to jump to another node or to terminate a call, the rest one or two functions are
not executed.
Examples
# Configure Service node 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 service
[Sysname-voice-ivr-node1] operation 1 end-call
Related commands
select-rule operation-order
select-rule operation-order
Use select-rule operation-order to specify the execution order of the configured functions.
Use undo select-rule operation-order to restore the default.