R2511-HP MSR Router Series Voice Command Reference(V5)

320
Syntax
select-rule operation-order 1st-operation 2nd-operation 3rd-operation
undo select-rule operation-order
Default
The execution order is select-rule operation-order 1 2 3.
Views
Service node view
Default command level
2: System level
Parameters
1st-operation: Specifies the serial number of the function to be executed first, in the range of 1 to 3.
2nd-operation: Specifies the serial number of the function to be executed secondly. The value range is 1
to 3, and the value cannot be the same as that of 1st-operation.
3rd-operation: Specifies the serial number of the function to be executed thirdly. The value range is 1 to
3, and the value cannot be the same as those of 1st-operation and 2nd-operation.
Examples
# Specify the execution order of the configured functions for node 1 as 1->3->2.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] node 1 service
[Sysname-voice-ivr-node1] select-rule operation-order 1 3 2
Related commands
operation
set-media
Use set-media to specify a media resource ID for a media resource file or an MOH audio input port.
Each codec can be configured with up to 256 media resource IDs.
Use undo set-media to remove the configuration.
Syntax
set-media media-id { file filename | moh-interface interface-number }
undo set-media { media-id | all }
Default
No customized media ID is specified for a media resource file.
Views
Voice media resource management view
Default command level
2: System level