R2511-HP MSR Router Series Voice Command Reference(V5)

321
Parameters
media-id: Specifies the media resource file ID, in the range 1000 to 2147483647.
file filename: Media resource file name. Spaces are permitted, and the file name must be in
double-quote marks. The maximum length of the value is 136 bytes, excluding the length of double-quote
marks.
moh-interface interface-number: MOH audio input port number.
all: All media resource file IDs.
Examples
# Specify 10001 as the media resource ID of the media resource file cfa0:/g729/ring.wav.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] ivr-system
[Sysname-voice-ivr] media-file g729r8
[Sysname-voice-ivr-g729r8] set-media 10001 file cfa0:/g729/ring.wav
Related commands
media-file
timeout
Use timeout to configure the input timeout processing method for an IVR node.
Use undo timeout to remove the configuration.
Syntax
timeout { end-call | goto-pre-node | goto-node node-id } [ expires seconds | media-play media-id
[ play-times ] | repeat repeat-times ] *
undo timeout
Default
No input timeout processing method is configured for an IVR node.
Views
Call node view, Jump node view
Default command level
2: System level
Parameters
end-call: Terminates the call when the maximum number of input timeouts is reached.
goto-pre-node: Return to the previous node when the maximum number of input timeouts is reached.
goto-node node-id: Jumps to a specified node when the maximum number of input timeouts is reached.
The value range for node-id is 1 to 256.
expires seconds: Specifies the timeout time in seconds. The value range for seconds is 1 to 255, and the
default is 10.
media-play media-id: Specifies the ID of the media resource file to be played after an input timeout
occurs and before the node is executed again. The value range for media-id is 0 to 2147483647.