R2511-HP MSR Router Series Voice Command Reference(V5)

327
Views
Any view
Default command level
2: Monitor level
Parameters
serial interface-number: Displays the FRF.11 sub-channel information on a specified interface.
dlci-number: Virtual circuit number in the range of 16 to 1007
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the FRF.11 sub-channel information on a VoFR DLCI.
<Sysname> display fr vofr-info
interface(dlci) vofr-mode cid cid-type
Serial2/0:0(100) vofr-nonstandard 5 frag-data
Serial2/0:0(100) vofr-nonstandard 4 voice-signal
# Display the FRF.11 sub-channel information on the specified interface.
<Sysname> display fr vofr-info ser2/0:0 17
interface(dlci) vofr-mode cid cid-type pkts(in/out/drop)
Serial2/0:0(17) vofr-nonstandard 254 frag-data 0/0/0
Serial2/0:0(17) vofr-nonstandard 255 voice-signal 0/1068/0
Table 63 Command output
Field Descri
p
tion
interface(dlci) Frame relay interface name (DLCI number).
vofr-mode
VoFR call control protocol, for example, VoFR nonstandard-compatible and
VoFR-Huawei-compatible.
cid Voice channel number.
cid-type Type of a voice channel.
pkts(in/out/drop) Numbers of inbound, outbound and dropped packets.
entity vofr
Use entity vofr to enter VoFR entity view.
Use undo entity vofr to remove the existing voice entity.
Syntax
entity entity-number vofr