R2511-HP MSR Router Series Voice Command Reference(V5)

24
Delay Adjust = 0
JB Delay Total = 0 ms
DSP Delay Total = 0 ms
JB Full = 99
DSP Full = 0
RTP Unexpected = 0
JB Errors = 0
Table 17 Command output
Field Description
Payload Size Packet assembly interval.
JB Discard Number of times the jitter buffer has discarded packets.
Delay Adjust
Number of times the jitter buffer has performed delay
adjust.
JB Delay Dec Declined delay time delivered to the DSP in total.
DSP Delay Dec Delay time actually declined by the DSP in total.
display voice statistics call-active
Use display voice statistics call-active to view the statistics of active calls.
Syntax
display voice statistics call-active { all | calling calling-number | called called-number } [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays the statistics of all active calls.
calling calling-number: Displays the active call statistics of the specified calling number.
called called-number: Displays the active call statistics of the specified called number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
A call contains two directions: the incoming call and outgoing call. Therefore, two call records are
generated for one call: one for the incoming call, and the other for the outgoing call. Call statistics are
based on the number of call records instead of the number of calls.