R2511-HP MSR Router Series Voice Command Reference(V5)

331
voice bandwidth
Use voice bandwidth to reserve a VoFR voice bandwidth.
Use undo voice bandwidth to remove the reserved bandwidth.
Syntax
voice bandwidth reserved-bps [ reserved ]
undo voice bandwidth
Default
No bandwidth is reserved for voice.
Views
Frame relay class view
Default command level
2: System level
Parameters
reserved-bps: Reserved voice bandwidth in the range of 8000 to 45000000 bps.
reserved: Reserves a VoFR voice bandwidth.
Usage guidelines
This command is configured in frame relay class view and takes effect only after the DLCI references such
a frame relay class. Otherwise, no voice bandwidth is available and call setup fails.
Examples
# Reserve a maximum bandwidth of 8 kbps for voice in frame relay class test1 view
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] voice bandwidth 8000 reserved
vofr
Use vofr to configure a VoFR operation mode for a DLCI.
Use undo vofr to restore the default.
Syntax
vofr { huawei-compatible [ dce | dte ] | motorola-compatible [ dce | dte ] | nonstandard-compatible
signal-channel ccid-no data-channel dcid-no [ keepalive ] }
undo vofr
Default
No VoFR operation mode is configured.
Views
Interface DLCI view
Default command level
2: System level