R2511-HP MSR Router Series Voice Command Reference(V5)

335
Examples
# Enable the RADIUS accounting function for users who dial the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] accounting
# Disable the RADIUS accounting function for users who dial the access number 17909.
[Sysname-voice-dial-anum17909] undo accounting
Related commands
• gw-access-number
• acct-method
• accounting-did
accounting-did
Use accounting-did to enable the RADIUS accounting function for all one-stage dialing users.
Use undo accounting-did to disable the RADIUS accounting function.
Syntax
accounting-did
undo accounting-did
Default
The RADIUS accounting function is disabled for all one-stage dialing users.
Views
Voice AAA client view
Default command level
2: System level
Usage guidelines
On one voice gateway, the RADIUS accounting for one-stage dialing users is separated from that for
two-stage dialing users. This command is applicable to only one-stage dialing users. With this function
enabled, the RADIUS server performs RADIUS accounting for all calls originated by one-stage dialing
users. With this function disabled, the RADIUS server does not perform accounting for any calls
originated by one-stage dialing users.
Examples
# Enable the accounting function for all one-stage dialing users.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] accounting-did
# Disable the accounting function for all one-stage dialing users.
[Sysname-voice-aaa] undo accounting-did