R2511-HP MSR Router Series Voice Command Reference(V5)

337
authentication
Use authentication to enable the RADIUS authentication function for users who dial some access number.
Use undo authentication to disable the RADIUS authentication function.
Syntax
authentication
undo authentication
Default
The RADIUS authentication function is disabled for users who dial access numbers.
Views
Access number view
Default command level
2: System level
Usage guidelines
For each access number, you can specify the RADIUS server to perform authentication for users who dial
it. If the authentication function is enabled for users who dial some access number, only users who pass
authentication can be authorized to make IP calls. If the authentication function is disabled, users who
dial the access number can directly make IP calls no matter whether they are legal.
The authentication function must be enabled before the authorization function. When the authentication
function is disabled, the authorization function is automatically disabled, and meanwhile, the
authorization and undo authorization commands are unavailable.
Examples
# Enable the authentication function for users who dial the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] authentication
# Disable the authentication function for users who dial the access number 17909.
[Sysname-voice-dial-anum17909] undo authentication
Related commands
• gw-access-number
• authorization
authentication-did
Use authentication-did to enable the authentication function for all one-stage dialing users.
Use undo authentication-did to disable the authentication function.
Syntax
authentication-did
undo authentication-did