R2511-HP MSR Router Series Voice Command Reference(V5)

338
Default
The authentication function is disabled for all one-stage dialing users.
Views
Voice AAA client view
Default command level
2: System level
Usage guidelines
This command is applicable to only one-stage dialing users, instead of two-stage dialing users.
With this function enabled, the calling number of one-stage dialing users who want to make IP calls is
sent to the RADIUS server for authentication. Only users who pass authentication can make IP calls.
Those who fail authentication are disconnected and cannot make IP calls.
The authentication function must be enabled before the authorization function. When the authentication
function is disabled, the authorization function will automatically be disabled, and meanwhile, the
authorization-did and undo authorization-did commands will be unavailable.
Examples
# Enable the authentication function for one-stage dialing users.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] authentication-did
Related commands
authorization-did
authorization
Use authorization to enable the authorization function for users who dial some access number.
Use undo authorization to disable the authorization function.
Syntax
authorization
undo authorization
Default
The authorization function is disabled for users who dial access numbers.
Views
Access number view
Default command level
2: System level
Usage guidelines
With this function enabled, called numbers are sent to the RADIUS server for authorization after users
who dial some access number to make IP calls pass authentication.