R2511-HP MSR Router Series Voice Command Reference(V5)

339
Enable the authentication function (by using the authentication command) before the authorization
function. Otherwise, the authorization command is unavailable.
Examples
# Enable the authorization function for users who dial the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] authentication
[Sysname-voice-dial-anum17909] authorization
# Disable the authorization function for users who dial the access number 17909.
[Sysname-voice-dial-anum17909] undo authorization
Related commands
• gw-access-number
• authentication
authorization-did
Use authorization-did to enable the authentication function for all one-stage dialing users.
Use undo authorization-did to disable the authorization function for all one-stage dialing users.
Syntax
authorization-did
undo authorization-did
Default
The authorization function is disabled for all one-stage dialing users.
Views
Voice AAA client view
Default command level
2: System level
Usage guidelines
This command is applicable to only one-stage dialing users, instead of two-stage dialing users. With this
function enabled, called numbers will be sent to the RADIUS server for authorization after users who dial
some access number to make IP calls pass authentication.
Enable the authentication function before the authorization function. Otherwise, the authorization-did
command is unavailable.
Examples
# Enable the authorization function for one-stage dialing users.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa] authentication-did
[Sysname-voice-aaa] authorization-did