R2511-HP MSR Router Series Voice Command Reference(V5)

340
# Disable the authorization function for one-stage dialing users.
[Sysname-voice-aaa] undo authorization-did
Related commands
authentication-did
callednumber receive-method
Use callednumber receive-method to configure the method of collecting digits of a called number.
Use undo callednumber receive-method to restore the default.
Syntax
callednumber receive-method { immediate | terminator }
undo callednumber receive-method
Default
Users need to press the dial terminator # after dialing all digits of a called number.
Views
Access number view
Default command level
2: System level
Parameters
immediate: Specifies the voice gateway to originate a call immediately it collects all digits of a called
number.
terminator: Specifies users to press the dial terminator # after dialing a called number.
Usage guidelines
This command is applicable to both the one-stage dialing process and two-stage dialing process. In the
terminator mode, the voice gateway can immediately originate a call only after users dial a called
number and press the dial terminator #, and otherwise, the voice gateway will not originate a call until
timeout. In the immediate mode, the voice gateway can originate a call immediately it collects all digits
of a called number, without waiting for users to press the dial terminator #. The immediate mode
simplifies users' operations.
Examples
# Set the method of collecting digits of called numbers to immediate for the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] callednumber receive-method immediate
# Restore the default method of collecting digits of called numbers for the access number 17909.
[Sysname-voice-dial-anum17909] undo callednumber receive-method
Related commands
gw-access-number