R2511-HP MSR Router Series Voice Command Reference(V5)

354
Examples
# Specify the dialing process for the access number 17909 as card number/password process.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] process-config cardnumber
# Restore the default dialing process for the access number 17909.
[Sysname-voice-dial-anum17909] undo process-config
Related commands
• gw-access-number
• card-digit
• password-digit
• selectlanguage
redialtimes
Use redialtimes to configure the number of redial attempts in each dialing step for an access number.
Use undo redialtimes to restore the default number of redial attempts for an access number.
Syntax
redialtimes redialtimes-number
undo redialtimes
Default
The number of redial attempts in each dialing step is 2 for an access number.
Views
Access number view
Default command level
2: System level
Parameters
redialtimes-number: Number of redial attempts, in the range of 0 to 10. In the card number/password
process, this argument refers to the times of reselecting a language or redialing a card number,
password, or a called number. In the caller number process with IVR, this argument refers to the times of
reselecting a language or redialing a called number.
Usage guidelines
The redialtimes-number argument refers to the number of redial attempts. The number of dial attempts is
the number of redial attempts plus 1.
This command is unavailable in the caller number process.
For the card number/password process, you can use the redialtimes command to set times of reselecting
a language and times of redialing a card number, password, or called number. To make an IP call, a
user first dials an access number, then selects a language, next enters a prepaid card number and
password, and finally dials a called number. Any error in each dialing step leads to a dialing failure.