R2511-HP MSR Router Series Voice Command Reference(V5)

356
Views
Access number view
Default command level
2: System level
Parameters
enable: Enables the language selection function so that users can select a language to play prompt
tones.
chinese: Plays prompt tones in Chinese.
english: Plays prompt tones in English.
Usage guidelines
This command is available only in the caller number process with IVR.
Examples
# Configure the voice gateway to play prompt tones in English.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] process-config voice-caller
[Sysname-voice-dial-anum17909] selectlanguage english
Related commands
• gw-access-number
• process-config
timer two-stage dial-interval
Use timer two-stage dial-interval to configure the timeout interval for a user to dial the next digit in a
two-stage dialing process.
Use undo timer two-stage dial-interval to restore the default.
Syntax
timer two-stage dial-interval seconds
undo timer two-stage dial-interval
Default
The timeout interval is 10 seconds.
Views
Access number view
Default command level
2: System level
Parameters
seconds: Timeout interval between two digits in a two-stage dialing process, in the range of 1 to 300
seconds.