R2511-HP MSR Router Series Voice Command Reference(V5)

33
Default command level
2: System level
Parameters
dscp-value: DSCP value in the range of 0 to 63 or the keyword af11, af12, af13, af21, af22, af23, af31,
af32, af33, af41, af42, af43, cs1, cs2, cs3, cs4, cs5, cs6, cs7, and ef.
Examples
# Set the DSCP value in the ToS field of the IP packets that carry the RTP stream of VoIP voice entity to
af41.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 2 voip
[Sysname-voice-dial-entity2] dscp media af41
entity
Use entity to enter voice entity view, or configure a voice entity and then enter its view if the voice entity
does not exist.
Use undo entity to remove the existing voice entity.
Syntax
entity entity-number [ ivr | pots | voip ]
undo entity { entity-number | all | ivr | pots | voip }
Views
Voice dial program view
Default command level
2: System level
Parameters
entity-number: Specifies a number for the voice entity, in the range of 1 to 2147483647.
all: All voice entities, including VoIP, POTS, VoFR, and IVR voice entities.
pots: Indicates that the voice entity originates a call from the local voice subscriber line.
voip: Indicates that the voice entity originates a call from the network side.
Usage guidelines
In a global view, use the entity command to enter a voice entity view, and use quit to return to the dial
program view.
For more information about IVR and VoFR voice entities, see Voice Configuration Guide.
The entity-number assigned to a VoIP, POTS, or IVR entity must be unique among all VoIP and POTS
entities.
The system supports up to 1,000 voice entities.
Examples
# Create and enter voice entity view to configure a POTS voice entity whose identification is 10.