R2511-HP MSR Router Series Voice Command Reference(V5)

36
[Sysname-voice-dial-entity100] jitter-buffer mode adaptive
jitter-buffer delay
Use jitter-buffer delay to set the operating parameters for the jitter buffer that operates in the adaptive
mode.
Use undo jitter-buffer delay to restore the default.
Syntax
jitter-buffer delay { initial milliseconds | maximum milliseconds }
undo jitter-buffer delay { initial | maximum }
Default
The initial buffering time is 30 milliseconds and the maximum buffering time is 160 milliseconds.
Views
POTS voice entity view, VoIP voice entity view
Default command level
2: System level
Parameters
initial milliseconds: Sets the initial buffering time for the jitter buffer that operates in the adaptive mode,
in milliseconds. The value range is 5 to 60.
maximum milliseconds: Sets the maximum buffering time for the jitter buffer that operates in the adaptive
mode, in milliseconds. The value range is 60 to 480.
Examples
# Set the initial buffering time for the jitter buffer that operates in the adaptive mode to 50 milliseconds.
[Sysname-voice-dial-entity100] jitter-buffer delay initial 50
keepalive
Use keepalive to configure the keepalive function.
Use undo keepalive to disable the keepalive function.
Syntax
keepalive [ interval seconds ]
undo keepalive
Default
The keepalive function is disabled.
Views
VoIP voice entity view
Default command level
2: System level