R2511-HP MSR Router Series Voice Command Reference(V5)

37
Parameters
interval seconds: Sets the time interval for sending the options keepalive packets, in seconds. The value
range is 5 to 65535, and the default is 60.
Usage guidelines
The keepalive function takes effect only when the destination address of the VoIP voice entity is a DNS
domain name or an IP address.
Examples
# Set the keepalive interval for the VoIP voice entity 203 to 180 seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 230 voip
[Sysname-voice-dial-entity230] keepalive interval 180
line
Use line to associate the voice entity with a specified voice subscriber line.
Use undo line to remove this association.
Syntax
line line-number
undo line
Default
There is no association between a voice entity and a voice subscriber line.
Views
POTS voice entity view
Default command level
2: System level
Parameters
line-number: Number of a subscriber line.
Examples
# Associate voice entity 10 and voice subscriber line 1/0.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] line 1/0
match-template
Use match-template to configure the number template for a voice entity.
Use undo match-template to remove the configuration.