R2511-HP MSR Router Series Voice Command Reference(V5)

Use register-number to enable the VoIP gateway to register numbers of a voice entity with an H.323

gatekeeper or SIP server.

Use undo register-number to disable a gateway from registering numbers of a voice entity with an H.323

gatekeeper or SIP server.

Syntax

undo register-number

Default

After configured with SIP-registration related parameters, a POTS voice entity initiates registration to the

SIP server.

Views

POTS voice entity view, IVR entity view

Default command level

2: System level

Usage guidelines

In some cases, you need to configure the same POTS voice entity on multiple gateways. As a GK and a

SIP server cannot have the same number, you cannot register a POTS voice entity with a GK and a SIP

server at the same time.

In other cases, you might need to register only some port numbers on the gateway with a GK or a SIP

server to meet some special requirements. Use the undo register-number command to specify the voice

entity whose number does not need to be registered.

Examples

# Specify the gateway not to register the numbers of POTS voice entity 10.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] entity 10 pots

[Sysname-voice-dial-entity10] undo register-number

Related commands

match-template

reset voice cmc statistic

Use reset voice cmc statistic to clear calling statistics on the CMC module.

Syntax

reset voice cmc statistic

Views

User view