R2511-HP MSR Router Series Voice Command Reference(V5)

44
rtp payload-type nte
Use rtp payload-type nte to configure the payload type field in RTP packets in the case of DTMF relay
using NTE.
Use undo rtp payload-type nte to restore the default.
Syntax
rtp payload-type nte value
undo rtp payload-type nte
Default
The payload type field in RTP packets is set to 101 in the case of DTMF relay using NTE.
Views
POTS voice entity view, VoIP voice entity view
Default command level
2: System level
Parameters
value: Value of the payload type field in RTP packets, in the range of 96 to 127.
Usage guidelines
Do not set the NTE payload type field to 98, which has already been used to identify nonstandard T38
fax packets.
When the device is connected with devices of other manufacturers for communication, you cannot set the
payload type field to any forbidden by these routers. Otherwise, an NTE negotiation failure might occur.
Examples
# Set the NTE payload type field to 102 for VoIP voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] rtp payload-type nte 102
rtp-detect timeout
Use rtp-detect timeout to configure the timeout interval for RTP streams.
Use undo rtp-detect timeout to restore the default.
Syntax
rtp-detect timeout value
undo rtp-detect timeout
Default
The timeout interval for RTP streams is 120 seconds.
Views
Voice view