R2511-HP MSR Router Series Voice Command Reference(V5)

46
Syntax
shutdown
undo shutdown
Default
The voice entity management status is UP.
Views
POTS voice entity view, VoIP voice entity view, VoFR entity view, IVR entity view
Default command level
2: System level
Usage guidelines
Running command shutdown will cause the voice entity unable to make calls.
Examples
# Change the management status of voice entity 4 to DOWN.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 4 pots
[Sysname-voice-dial-entity4] shutdown
tunnel-on
Use tunnel-on to enable tunnel function.
Use undo tunnel-on to disable tunnel function.
Syntax
tunnel-on
undo tunnel-on
Default
The tunnel function is disabled.
Views
VoIP voice entity view
Default command level
2: System level
Usage guidelines
Tunnel function can assist in negotiating process of such nonstandard H.245 message as transmitting
DTMF digit transparently.
Only after successfully enabling the fast connection mode, you can configure the tunnel function. You can
enable or disable fast connection for each outgoing call on the originating GW. If fast connection is
enabled on the originating GW, the terminating GW will determine whether to enable fast connection
for call initialization and enable tunnel function, depending on the configurations of the voip called-start
and voip called-tunnel enable commands.