R2511-HP MSR Router Series Voice Command Reference(V5)

49
[Sysname] quit
<Sysname> reboot
# After the router is rebooted, execute the display device verbose command to view the settings.
<Sysname> display device verbose
Slot No. Board Type Status Max Ports
0 MSR50-60 RPU Board Normal 5
2 SIC-1VT1 Normal 1
Slot 0
Status: Normal
Type: MSR50-60 RPU Board
Hardware: 3.0
Driver: 1.0
CPLD: 2.0
SD701: 2.0
VCPM: Normal [PCB VER: 3.0 CPLD VER: 1.0 FPGA VER: 4.0]
VPM1: Normal [PCB VER: 3.0 CPLD VER: 2.0 DSP VER: 4.0]
DSP 0: Normal
DSP 1: Normal
DSP 2: Normal
DSP 3: Normal
DSP Image: MS
VPM2: Normal [PCB VER: 3.0 CPLD VER: 2.0 DSP VER: 4.0]
DSP 0: Normal
DSP 1: Normal
DSP 2: Normal
DSP 3: Normal
DSP Image: MS
VPM3: Normal [PCB VER: 3.0 CPLD VER: 2.0 DSP VER: 4.0]
DSP 0: Normal
DSP 1: Normal
DSP 2: Normal
DSP 3: Normal
DSP Image: MS
Slot 2
Status: Normal
Type: SIC-1VT1
Hardware: 2.0
Driver: 4.0
CPLD: 1.0
FDSP: Normal [DSP VER: 2.0]
voice-setup
Use voice-setup to enter voice view and enable voice services.
Use undo voice-setup to disable voice services and quite voice view.