R2511-HP MSR Router Series Voice Command Reference(V5)

50
Syntax
voice-setup
undo voice-setup
Views
System view
Default command level
2: System level
Examples
# Enter voice view and enable voice services.
<Sysname> system-view
[Sysname] voice-setup
voip called-tunnel enable
Use voip called-tunnel enable to enable the tunnel function on the called gateway.
Use undo voip called-tunnel enable to disable the tunnel function on the called gateway.
Syntax
voip called-tunnel enable
undo voip called-tunnel enable
Default
The tunnel function on the called gateway is enabled.
Views
Voice view
Default command level
2: System level
Examples
# Disable the tunnel function on the called gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] undo voip called-tunnel enable
Related commands
tunnel-on
voip called-start
Use voip call-start to configure a call initialization mode for the called GW.
Use undo voip call-start to restore the default.
Syntax
voip called-start { fast | normal }
undo voip called-start