R2511-HP MSR Router Series Voice Command Reference(V5)

53
Ke
y
word DSCP value in binar
y
DSCP value in decimal
af23 010110 22
af31 011010 26
af32 011100 28
af33 011110 30
af41 100010 34
af42 100100 36
af43 100110 38
cs1 001000 8
cs2 010000 16
cs3 011000 24
cs4 100000 32
cs5 101000 40
cs6 110000 48
cs7 111000 56
default 101110 46
ef 101110 46
Usage guidelines
The function of this command is the same as the command used for setting DSCP in the "QoS" part of this
manual. If two DSCP values are configured, the one configured in the "QoS" part takes priority.
Examples
# Set the DSCP value in the ToS field in the IP packets that carry voice signaling to af41.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] vqa dscp signal af41
vqa dsp-monitor buffer-time
Use vqa dsp-monitor buffer-time to set duration of monitoring DSP buffered data.
Use undo vqa dsp-monitor buffer-time to restore the default.
Syntax
vqa dsp-monitor buffer-time time
undo vqa dsp-monitor buffer-time
Default
The duration of monitoring DSP buffered data is 270 milliseconds.
Views
Voice view