R2511-HP MSR Router Series Voice Command Reference(V5)

59
Default command level
2: System level
Examples
# Enable CID on voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] cid display
cid receive
Use cid receive to enable CID.
Use undo cid receive to disable CID.
Syntax
cid receive
undo cid receive
Default
CID is enabled.
Views
Analog FXO voice subscriber line view
Default command level
2: System level
Usage guidelines
When CID is disabled, the local FXO interface does the following when the calling party sends a calling
number:
• If a number is configured in the number template for the POTS entity associated with the local FXO
interface, the interface substitutes the original calling number with this number and sends it to the
called side.
• If wildcard dots (.) are used in the number configured in the number template for the POTS entity
associated with the local FXO interface, the interface substitutes the dots with zeros. For example,
if the number on the template is 1…, the original calling number is substituted with 1000.
Examples
# Enable CID on voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] cid receive
cid ring
Use cid ring to configure the time for CID check and after the CID check, the number of rings the FXO line
receives before going off-hook.
Use undo cid ring to restore the default.