R2511-HP MSR Router Series Voice Command Reference(V5)

60
Syntax
cid ring { 0 | 1 | 2 } [ times ]
undo cid ring
Default
CID check is performed between the first and the second rings, and the FXO line goes off-hook as soon
as the check completes, cid ring 1 0.
Views
Analog FXO voice subscriber line view
Default command level
2: System level
Parameters
0: CID check is performed before the phone rings.
1: CID check is performed between the first and the second rings.
2: CID check is performed between the second and the third rings.
times: Ring count after the CID check before the FXO line goes off-hook. The value is in the range 0 to 5.
The greater the value, the later the FXO line goes off-hook.
Examples
# Configure CID check to be performed before the phone rings on voice subscriber line 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] cid ring 0
cid send
Use cid send to enable the FXS or FXO voice subscriber line to send calling identity information to the
remote end.
Use undo cid send to disable the FXS or FXO voice subscriber line from sending calling identity
information to the remote end.
Syntax
cid send
undo cid send
Default
The FXS or FXO voice subscriber line sends calling identity information to the remote end.
Views
Analog FXS voice subscriber line view, FXO voice subscriber line view
Default command level
2: System level
Usage guidelines
After you configure the undo cid send command on the FXO voice subscriber line, the FXO voice
subscriber line will not send any calling number to the called side, whether the originating side has sent