R2511-HP MSR Router Series Voice Command Reference(V5)

68
Default
The delay signal duration is 400 milliseconds.
Views
E&M voice subscriber line view
Default command level
2: System level
Parameters
hold milliseconds: Specifies delay signal duration (in milliseconds) in the delay start mode, in the range
of 100 to 5000.
Examples
# Set the delay signal duration in the delay start mode to 500 seconds.
<Sysname> system-view
[Sysname] subscriber-line 5/0
[Sysname-subscriber-line5/0] em-signal delay
[Sysname-subscriber-line5/0] delay hold 500
Related commands
em-signal
delay rising
Use delay rising to configure a delay time from when the terminating side detects a seizure signal to
when it sends a delay signal in the delay start mode.
Use undo delay rising to restore the default.
Syntax
delay rising milliseconds
undo delay rising
Default
The delay time is 300 milliseconds.
Views
E&M voice subscriber line view
Default command level
2: System level
Parameters
rising milliseconds: Specifies delay time (in milliseconds) from when the terminating side detects a
seizure signal to when it sends a delay signal in the delay start mode. The value range for milliseconds
is 20 to 2000.
Examples
# Set the delay time from when the terminating side detects a seizure signal to when it sends a delay
signal in the delay start mode to 700 milliseconds.
<Sysname> system-view
[Sysname] subscriber-line 5/0