R2511-HP MSR Router Series Voice Command Reference(V5)

69
[Sysname-subscriber-line5/0] em-signal delay
[Sysname-subscriber-line5/0] delay rising 700
Related commands
em-signal
delay send-dtmf
Use delay send-dtmf to configure a delay before the originating side sends DTMF signals in the
immediate start mode.
Use undo delay send-dtmf to restore the default.
Syntax
delay send-dtmf milliseconds
undo delay send-dtmf
Default
The delay before the originating side sends DTMF signals in the immediate start mode is 300
milliseconds.
Views
E&M voice subscriber line view
Parameters
send-dtmf milliseconds: Specifies a delay (in milliseconds) before the originating side sends DTMF
signals in the immediate start mode. The value range for milliseconds is 50 to 5000.
Examples
# Set the delay before the originating side sends DTMF signals in the immediate start mode to 3,000
milliseconds.
<Sysname> system-view
[Sysname] subscriber-line 5/0
[Sysname-subscriber-line5/0] delay send-dtmf 3000
Related commands
em-signal
delay send-wink
Use delay send-wink to configure an interval from when the terminating side receives a seizure signal to
when it sends a wink signal in the wink start mode.
Use undo delay send-wink to restore the default.
Syntax
delay send-wink milliseconds
undo delay send-wink
Default
The interval from when the terminating side receives a seizure signal to when it sends a wink signal is
200 milliseconds in the wink start mode.