R2511-HP MSR Router Series Voice Command Reference(V5)

71
Related commands
em-signal
delay wink-rising
Use delay wink-rising to configure a maximum amount of time the originating side waits for a wink
signal after sending a seizure signal in the wink start mode.
Use undo delay wink-rising to restore the default.
Syntax
delay wink-rising milliseconds
undo delay wink-rising
Default
The maximum amount of time the originating side waits for a wink signal after sending a seizure signal
is 3,000 milliseconds in the wink start mode.
Views
E&M voice subscriber line view
Default command level
2: System level
Parameters
wink-rising milliseconds: Specifies the maximum amount of time (in milliseconds) the originating side
waits for a wink signal after sending a seizure signal in the wink start mode. The value range for
milliseconds is 100 to 5000.
Examples
# Set the maximum amount of time the originating side waits for a wink signal after sending a seizure
signal in the wink start mode to 2,000 milliseconds.
<Sysname> system-view
[Sysname] subscriber-line 5/0
[Sysname-subscriber-line5/0] em-signal wink
[Sysname-subscriber-line5/0] delay wink-rising 2000
Related commands
em-signal
delay start-dial
Use delay start-dial to configure the dial delay.
Use undo delay start-dial to restore the default.
Syntax
delay start-dial seconds
undo delay start-dial
Default
The dial delay is 1 second.