R2511-HP MSR Router Series Voice Command Reference(V5)

72
Views
FXS voice subscriber line view, FXO voice subscriber line view
Default command level
2: System level
Parameters
seconds: Dial delay in seconds, in the range of 0 to 10.
Examples
# Set the dial delay on FXS subscriber line 1/0 to 5 seconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] delay start-dial 5
description (voice subscriber line view)
Use description to configure a subscriber line description string.
Use undo description to delete the description.
Syntax
description string
undo description
Default
The description for the voice subscriber line is interface-name+Interface.
Views
FXS voice subscriber line view, FXO voice subscriber line view, E&M voice subscriber line view, BSV voice
subscriber line view
Default command level
2: System level
Parameters
string: Description string of voice subscriber line, whose length is in the range of 1 to 80 characters.
Usage guidelines
You can use the description command to add a description to a voice subscriber line, which has no effect
on the performance of the voice entity. You can view this description with the display command.
Examples
# Mark voice subscriber line 1/0 as lab_1.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] description lab_1
disconnect lcfo
Use disconnect lcfo to enable the sending of pulse signals at hangup.
Use undo disconnect lcfo to disable the sending of pulse signals at hangup.