R2511-HP MSR Router Series Voice Command Reference(V5)

73
Syntax
disconnect lcfo
undo disconnect lcfo
Default
The sending of pulse signal at hangup is disabled, and the system plays busy tones to the other end.
Views
FXS voice subscriber line view
Default Level
2: System level
Parameters
None
Examples
# Enable the sending of pulse signals at hangup on the FXS voice subscriber line 5/1.
<Sysname> system-view
[Sysname] subscriber-line 5/1
[Sysname-subscriber-line5/1] disconnect lcfo
display voice subscriber-line
Use display voice subscriber-line to view the configuration information of the subscriber line, such as the
type, status, codec mode, and receive and transmit gains.
Syntax
display voice subscriber-line [ line-number ] [ brief ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
line-number: Specifies a subscriber line by its number. If no subscriber line is specified, the command
displays information about all subscriber lines (analog and digital subscriber lines).
brief: Displays brief information about subscriber lines. If you do not specify this keyword, the command
displays detailed information about subscriber lines.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.