R2511-HP MSR Router Series Voice Command Reference(V5)

76
Field Description
OutBytes Bytes of sent packets on the voice interface.
LastRcvPacketLen Length of the last received packet on the voice interface.
LastSndPacketLen Length of the last sent packet on the voice interface.
CmdInBuff Number of commands in the command buffer of the voice interface.
CmdInTotalBuff Total number of commands in the command buffers of the voice interface card.
AbortCmdCount Number of command packets discarded on the voice interface.
AbortPktsCount Number of packets discarded on the voice interface.
G723R53ToR63Packet
Number of G723R53 packets converted to G723R63 packets on the voice
interface.
G723R63ToR53Packet
Number of G723R63 packets converted to G723R53 packets on the voice
interface.
ClearDspBuffCount Number of DSP buffers cleared on the voice interface.
# Display brief information about all subscriber lines.
<Sysname> display voice subscriber-line brief
Line Type Phy-status Call-status Private-line Description
1/0 PAGE UP(S) IDLE N/A
1/1 MOH UP(S) N/A N/A
2/2 FXS-LS UP IDLE Not Set
6/0 FXO-LS DOWN IDLE Not Set
5/0:15 ISDN UP Not Set
5/0:15.0 IDLE
5/0:15.1 IDLE
5/0:15.2 IDLE
5/0:15.3 IDLE
Table 25 Command output
Field Description
Line Number of the subscriber line.
Type
Type of the voice subscriber line or signaling used by the voice subscriber line:
• PAGE—PAGE subscriber line.
• FXS-LS—FXS subscriber line that uses loop-start signaling.
• FXO-LS—FXO subscriber line that uses loop-start signaling.
• FXS-GS—FXS subscriber line that uses ground-start signaling.
• FXO-GS—FXO subscriber line that uses ground-start signaling.
• R2—Subscriber line that uses R2 signaling.
• ISDN—Subscriber line that uses ISDN signaling.
• E&M-DLY—Subscriber line that uses the delay start mode.
• E&M-WNK—Subscriber line that uses the wink start mode.
• E&M-IMD—Subscriber line that uses the immediate start mode.
• Unknown.