R2511-HP MSR Router Series Voice Configuration Guide(V5)

90
To mirror PCM, RTP, or voice command data on a digital voice subscriber line to a specified interface or
destination:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter digital voice
subscriber line view.
subscriber-line line-number N/A
3. Mirror PCM, RTP, or
voice command data to
a specified interface or
destination.
• Mirror PCM or RTP data based on a calling
number:
mirror number number { pcm | { in | out | all }
data } calling calling-number to { local-interface
interface-type interface-number [ mac H-H-H ] |
remote-ip ip-address [ port port ] }
• Mirror PCM data based on a timeslot:
mirror number number pcm { bdsp | fdsp }
channel-number to { local-interface
interface-type interface-number [ mac H-H-H ] |
remote-ip ip-address [ port port ] }
• Mirror RTP or voice command data on all
timeslots:
mirror number number { in | out | all }
{ command | data } to { local-interface
interface-type interface-number [ mac H-H-H ] |
remote-ip ip-address [ port port ] }
Optional.
By default, no traffic is
mirrored.
Displaying and maintaining digital voice subscriber
lines
Task Command Remarks
Display configurations of digital
voice subscriber lines.
display voice subscriber line
[ slot-number:{ { ts-set-number |
ts-set-number.sub-timeslot } | 15 | 23 } ]
[ brief ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Digital voice subscriber line configuration
examples
This section provides configuration examples for digital voice subscriber lines.